If there is any residue from the installation, you will want to ensure that it has been removed. Any finishing lines or paint parks from previous windows need to be removed alongside any protective tape. Step 4 – Window Finishesīefore you finish the installation, you will need to ensure that the window is in pristine condition. This is important especially for new-builds as there have been updated regulations for this. Any fixings that occur through the cill need to be sealed to protect the home from water damage.Īppropriate glazing should now be positioned in accordance with the manufacturer’s guidelines and the industry standards. They must also not be closer than 150mm to mullion centre lines. These fixings must not be less than 150mm and not bigger than 250mm at the corner joints. There is a variety of fixing methods for you to consider:įrom this, mechanical fixings must be carried out.You can use packers or wedges to temporarily hold the window in place before you fix it to the wall. The first step is to position the new uPVC window correctly within the opening. Tools, including a chisel, will help you remove this silicone and carefully take the window away from the wall. Simply cut through the silicone and pry the windows away from the wall. You will need to be very careful when removing your old windows as they can be heavy and are a hazard. We also have sliding sash, casement and bay window installation guides if you want something more specific. Once you have completed all measurements, you will want to make one final check of the premises to ensure that any obstructions or structural concerns are clear that you need to be made aware of before carrying out any installation work. You will need to get the smallest height and width measurements taken as these will become the tight sizes you will need to use.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |